Eaton i-on series Engineering Manual

Also see for i-on Series: Administration and User Manual Administration and User Manual Engineering guide

Contents

The Installer Menu i-on RangePage 36MENU Option Factory Default Notespartitions.Wired outputsPanel Name Type PolarityOutput 01 Siren NormalOutput 02 Strobe NormalOutput 03 Siren NormalOutput 04 Strobe Normal16 40i-on16/i-on40 do not have separateSiren and Strobe outputs.Panel Name Type PolaritySiren Siren NormalStrobe Strobe NormalPAN>OP1 Siren NormalPAN>OP2 Strobe NormalPAN>OP3 Siren NormalPAN>OP4 Strobe Normal30 50 160In addition to Siren and Strobe:i-on30EX has one outputi-on50EX has three outputsi-on160EX has four outputs.NOTE: You cannot change Sirenand Strobe outputs to other types.Pulsed NoPartitions All outputs allocated to all partitions. Appears only in a Partitionedsystem.Delay 0 seconds Appears when Pulsed set to “Yes”.On time 1 second Appears when Pulsed set to “Yes”.Exp. W1-nn Name Type PolarityW1>nn>01 Not Used NormalW1>nn>02 Not Used NormalW1>nn>03 Not Used NormalW1>nn>04 Not Used Normal30 50 160Appears only if EXP-W1 or EXP-PSU added to bus.“nn” = bus addressPulsed NoPartitions All outputs allocated to all partitions. Appears only in a Partitionedsystem.Delay 0 seconds Appears when Pulsed set to “Yes”.On time 1 second Appears when Pulsed set to “Yes”.Keypad 1-nn Name Type PolarityK1>nn>01 Not Used NormalAppears only when a suitablekeypad is fitted.“nn” = keypad numberPulsed NoPartitions All outputs allocated to all partitions. Appears only in a Partitionedsystem.Delay 0 seconds Appears when Pulsed set to “Yes”.On time 1 second Appears when Pulsed set to “Yes”.Plug-by outputs 30 40 50 160Name Type PolarityOutput 01 Fire NormalOutput 02 Hold Up Alarm NormalOutput 03 Burglar Alarm NormalOutput 04 Open / Close InvertedOutput 05 Zone Omit (System)(see Note)NormalOutput 06 Tamper NormalOutput 07 Confirmed Alarm NormalOutput 08 General Fault NormalOutput 09 AC Fail NormalOutput 10 Battery Fault NormalOutput 11 Technical Alarm NormalOutput 12 Alarm Abort NormalOutput 13 Ext PSU Low Volt NormalOutput 14 Ext PSU Fault NormalOutput 15 24 Hour Alarm NormalOutput 16 RF Fault Normali-on30 = Output 01...12i-on40 = Output 01...12i-on50 = Output 01...16i-on160 = Output 01...16Note: on EUR systems the defaultfor plug-by output 5 is Zone Omit(Setting)Pulsed NoPartitions All outputs allocated to all partitions. Appears only in a Partitionedsystem.Delay 0 seconds Appears when Pulsed set to “Yes”.