Eaton i-on series Engineering Manual

Also see for i-on Series: Administration and User Manual Administration and User Manual Engineering guide

Contents

Installer Menu Options i-on RangePage 82Final Exit In a Part Setting system, any Final Exit zones withthe Part Set B, C or D attributes will continue to actas Final Exit zones during part set.In a Partitioned system, any Final Exit zones,belonging to the partition, with the Part Set attributewill continue to act as Final Exit zones during partset.Normal Alarm In a Part Setting System any Final Exit zones withthe Part Set B, C or D attributes will act as NormalAlarm zones during part set.In a Partitioned system, any Final Exit zones,belonging to the partition, with the Part Set attributewill act as Normal Alarm zones during part set.Part Set Entry RouteThis option controls how the system treats Entry Route zones during part set.Entry Route In a Part Setting system, all Entry Route zones withthe Part Set B, C or D attributes will continue to act asEntry Routes during part set.In a Partitioned system, all Entry Route zones,belonging to the partition, with the Part Set attributewill continue to act as Entry Routes during part set.Final Exit In a Part Setting System, any Entry Route zones withthe Part Set B, C or D attributes will act as Final Exitzones during part set.In a Partitioned system, any Entry Route zones,belonging to the partition, with the part set attributewill act as Final Exit zones during part set.Strobe on Set/Part Set Strobe SetWhen set to ON this option causes the control unit to activate any outputprogrammed as Strobe, plus the strobe on any 760ES wireless siren. Theoutputs/strobes are active for ten seconds after the system sets. Strobe On Setapplies to Full Set and all the Part Sets.Strobe on Unset/Part Set Strobe UnsetWhen set to ON this option causes the control unit to activate any outputprogrammed as Strobe, plus the strobe on any 760ES wireless siren. Theoutputs/strobes are active for ten seconds after the system unsets. Strobe On Unsetapplies to Full Set and all the Part Sets.Full Set Link30 40 50 160The Full Set Link option is available on Partitioned systems. Full Set Link allows you to setup a Common Area. See Appendix II for an example of how to use a Common Area.Partition 1 is always the Common Area. You can link Partition 1 to any of the otherpartitions. When all of the linked partitions are set, then the control unit Full Sets Partition1. In addition, the system takes on whatever Alarm Response you have allocated toPartition 1.