i-on Range The Installer MenuPage 35MENU Option Factory Default NotesEnable Keypad Yes (all keypads enabled) 30 50 160Keypad K1-51...K1-95 Display shows keypads currentlyaddressed on bus.Replace Keypad 30 50 160Keypad K1-51...K1-95 Display shows keypads currentlyaddressed on bus.Radio KeypadsAdd/Del Radio KeypadEdit KeypadsRadio Kpd 01...20 Total number of radio keypadsdepends on control unit type.Name “Radio Kpd 0n”Partitions Partition 1 Appears only in a Partitionedsystem.Key A Name: “Key A”Setting: Partition 1 Full SetOR Full Set in a Part Setting System30 40 50 160Appears only in a Partitionedsystem.Key B Name: “Key B”Setting: Partition 2 Full SetOR Part Set B in a Part Setting System30 40 50 160Appears only in a Partitionedsystem.Key C Name: “Key C”Setting: Partition 3 Full SetOR Part Set C in a Part Setting System30 40 50 160Appears only in a Partitionedsystem.Key D Name: “Key D”Setting: Partition 4 Full SetOR Part Set D in a Part Setting System30 40 50 160Appears only in a Partitionedsystem.External SirensAdd/Delete Ext. SirenEdit external sirenSiren 01...20 Siren numbers depend on panel.Name 30 50 160Partitions Partition 01 Appears only in a Partitionedsystem.Info Modules 40Teach Info ModuleUpdatesReady-to-set LEDWAMs 30 40 50 160Add/Del WAMEdit WAM2 OUTPUTSRadio outputsAdd OutputsEdit OutputsO/P 1...04/08 Name TypeO/P 01...O/P 04/08Not Used 16 40i-on16 has four radio outputs, i-on40 has eight.Exp. R1>nn>01...08 Name TypeO/P R1>00>01...O/P R1>00>08Not Used 30 50 160Pulsed NoPartitions Appears only in a Partitionedsystem. All outputs allocated to all
