The Installer Menu i-on RangePage 40MENU Option Factory Default Notescomply with EN50131.Appears in EUR versions, OR onlywhen System Options –Confirmation Mode is “Basic”.Panel LoudspeakerLoudspeaker 1 (or 2) (Two loudspeakers on i-on160EX.)Volume ****Partitions01...04 (i-on30)01...04 (i-on40)01...05 (i-on50)01...20 (i-on160)Yes 30 40 50 160 Appearsonly in a Partitioned system.Assigned to all partitions. Numberof partitions depends on paneltype.Entry Alarm Delay Enabled This setting is required in order tocomply with EN50131 8.3.8.2.Abort Time 120 secondsSupervision TamperJamming TamperForce Set OffTamper Omit Disabled This setting is required in order tocomply with EN50131.CSID Code 0000Silence Alerts User CodeMains Fail Delay 0 minutes This setting is required in order tocomply with EN50131.Battery 2 Disabled 160. This value dependson how you answer the Battery 2monitoring question during theinitial start-up.Set Date & TimePanel Tamper Return CC5 COMMUNICATIONSARC Reporting Only visible on i-on30EXD and i-on50EXD or when suitablecommunications module fitted.To comply with EN50131 the panelmust have a communicator.Call Mode Single A “single” or “alternate” setting isrequired in order to comply withEN50131.Phone book EmptyIP Network Only visible when suitablecommunications module fitted.Account Number 000000 Part setting system has oneaccount number. A partitionedsystem has one account numberper partition.Report Type Fast FormatFast Format channels UKChannel 1: Fire AlarmChannel 2: Hold Up AlarmChannel 3: Burglar AlarmChannel 4: Open / CloseChannel 5: Zone Omit (System) (see Note 1)Channel 6: TamperChannel 7: Confirmed AlarmChannel 8: General FaultAppears only when ReportType=Fast Format1. In EUR versions Channel 5 isZone Omit (Setting) by default.CID/SIA Events Fire Alarm: YesHold Up Alarm: YesBurglar Alarm: YesNotes:1. Appears when Report Type=CIDor SIA.