Eaton i-on series Engineering Manual

Also see for i-on Series: Administration and User Manual Administration and User Manual Engineering guide

Contents

i-on Range IntroductionPage 5The navigation key has been redesigned so that the key itself glows red or green toshow system status.The LCD display is slightly smaller in order to provide space for a customisable label.This label can be printed with installer details (for example logo or telephone number).Please contact the Eaton’s Security Business marketing department for more details.All the KEY- keypads allow the installer to program the behaviour of the backlight, theilluminated ABCD keys and the LEDs in the navigation key. Instead of using jumpers (ason the i-kp01) the new keypads now have their own local programming menu, see page 19for details.In the i-on EX panels the keypad backlights, ABCD/Navigation key LEDs can beprogrammed from the Installer menu, (see page 59). The i-on16 and i-on40 can alsoprogram the keypad backlights from the control unit, but to change the behaviour of theABCD/Navigation key LEDs you must use the keypad’s local programming menu.The differences between the KEY-K01, KEY-KP01 and KEY-KPZ01 are as follows:The KEY-K01 does not have an internal prox reader.The KEY-KP01 has an internal prox reader and terminals for connecting and externalprox reader (the KEY-EP).The KEY-KPZ01:Has an internal prox reader and terminals for connecting an external prox reader(the KEY-EP).Provides terminals for two zones.Provides terminals for a single output.Note: Do not fit any keypad with an internal prox reader closer than one meter to any othertype of prox reader. This includes other keypads with prox readers, external proxreaders such as the KEY-EP, or prox readers used by other systems (for exampleaccess control systems). If you mount prox readers closer together than one meter(including on the other side of walls) then the two prox readers will interfere and maynot work correctly.Engineering Keypad30 50 160An Engineering Keypad is a modified i-kp01 that can be plugged into a dedicatedconnector on the control unit PCB or any of the expanders. An Engineering Keypad doesnot need to be addressed, and will always be recognised by the control unit as anEngineering Keypad.You can use an Engineering Keypad to program the system without being tied to any ofthe installed keypads. If you wish to move an Engineering keypad from one connectionpoint to another then you can do so without removing power from the system.Expanders30 50 160Wired Expander The EXP-W10 wired expander provides connections for:Either ten FSL zones, or five 4-wire CCL zones, or ten 2-wireCCL zones.One loudspeakerFour wired programmable outputsThe EXP-WCC wired expander in general provides the same numberof connections as the EXP-W10, but in addition also providesterminals for ten 4-wire CCL zones instead of five.