184 Universal T1 WAN (UTWAN)N0008589 3.35 Press the TAB key to save your settings.Configuring the IPCP Options1 On the navigation tree, click the Resources key and click the UTWAN key.2 Click the UTWAN1 heading.The Summary screen appears.3 Click the IPCP Options tab.The IPCP Options screen appears.4 Configure the IPCP Options according to the information in the following table.5 Press the TAB key to save your settings.LQ ReportingPeriodEnter the maximum time in 100th of seconds between the transmission of packets.Possible values are 100 to 60000.The default value is 1000.Retry TimerTimeout ValueEnter the number of seconds waited before retransmitting LCP Configure-Request packets.Possible value are 30 to 180.The default value is 60.Table 26 IPCP OptionsAttribute DescriptionIPCP TimeoutValueEnter the number of seconds waited before retransmitting Configure-Request andTerminate-Request packets.Possible values are 0 to 65000 seconds.The default value is 3 seconds.IPComp Protocol Enter the IPComp Protocol.Possible values are 0 to 65000.The default value is 0.IPCP MaxTerminateRequestEnter the maximum number of Terminate-Request packets sent.Possible values are 0 to 65000.The default value is 2.IPCP MaxConfigureRequestEnter the maximum number of Configure-Request packets sent.Possible values are 0 to 65000.The default value is 10.IPCP MaxConfigure NakEnter the maximum number of Configure-NAK packets sent.Possible values are 0 to 65000.The default value is 5.Table 25 LCP Options (Continued)Attribute Description
