706 Guidelines for using Remote Dial-inN0008589 3.3Deleting a PPPoE interfaceTo delete a PPPoE interface:1 On the navigation tree, click the Resources key and click the Dial Up key.2 Click the PPPoE key.3 Click the heading of the PPPoE interface you want to delete.4 Click the Delete button.Or, right click the PPPoE interface heading and click Delete.A confirmation dialog box appears.5 Click Yes.Guidelines for using Remote Dial-inConsider the following guidelines when using remote dial-in:• The remote dial-in for administration and the backup WAN link share the same modem. If aremote administration user is connected while the primary link breaks, the automatic backupfunction does not occur.• While using the back-up interface, Business Communications Manager always calls. BusinessCommunications Manager does not answer an incoming call from a router on the V.90interface.• If you are using the remote dial-in for maintenance, Nortel Networks recommends that you usethe Preinstall Client Access Home Page to access Business Communications Manager.
