252 Assigning Trunk/line dataN0008589 3.3Ground start fieldsRedirect to Enter a dial string (including routing code) to redirect the line to an externaltelephone, such as a call attendant on another system.If you want to stop redirection, you need to delete the dial string and allow therecord to update.WARNING: Enable modulesIf you disabled any trunk media bay modules prior to performing programming, enable them now toensure your system will function properly.Table 33 Ground start fieldsAttribute Value DescriptionLine type PublicPrivate to:Pool A to O,Define how the line is used in relation to other lines in the system.• Public line: can be accessed by more than one telephone.• Private line: can be assigned only to one telephone and the prime telephone forthat line. Enter the internal number of the telephone.• Pool A - O: assigns the line to one of the line pools. If a line is assigned to a linepool, but is not assigned to any telephone, that line is available only for outgoingcalls.For more information and tips, refer to “Line pool tips” on page 271.Dial mode PulseToneSpecify whether the system uses dual tone multifrequency (DTMF) or pulsesignaling on the trunk.Table 32 Loop start analog and digital fields (Continued)Attribute Value DescriptionManual answer line Auto answer line
