Configuring IP Firewall Filters for an interface 827Programming Operations GuideAdding an Output Filter for a Firewall Filter InterfaceBefore you can specify a rule order, you must add filters.The maximum number of output filter rules you can add is 32.1 Click the Output Filter Rules’ Setting tab.The Output Filter Rules’ Settings screen appears.2 On the Configuration menu, click Add Output Filter Rule.3 Configure the Output Filter Rule settings. These setting are described in the table in “Addingan Input Filter for a Firewall Filter Interface” on page 823.4 Click the Save button.Modifying an Output Filter for a Firewall Filter Interface1 Click the Output Filter Rules’ Setting tab.The Output Filter Rules’ Settings screen appears.2 Click the Output Filter you want to modify.3 On the Configuration menu, click Modify Output Filter Rule.4 Modify the Output Filter attributes.5 Click the Save button.Deleting an Output Filter for a Firewall Filter Interface1 Click the Output Filter Rules’ Setting tab.The Output Filter Rules’ Settings screen appears.2 Click the Output Filter you want to delete.3 On the Configuration menu, click Delete Output Filter Rule.A message appears that asks you to confirm the deletion.4 Click the Yes button.
