646 LAN settings for DHCP ServerN0008589 3.3LAN settings for DHCP ServerThis section describes configuring the DHCP server, as well as:• “Configuring Address ranges for a Local Scope” on page 648• “Configuring Excluded addresses for a Local Scope” on page 649• “Configuring Reserved addresses for a Local Scope” on page 651If you configured the DHCP mode for DHCPServer, then configure the LAN scope attributes asfollows. If the DHCP mode is DHCPRelayAgent refer to “LAN settings for DHCP Relay Agent”on page 663.1 On the navigation tree, click the Services key and click the DHCP key.2 Click the Local Scope key and click the LAN1 heading.The LAN Scope Specific Options screen appears.Note: If your Business Communications Manager system has multiple LAN interfaces,you can see multiple DHCP scopes under DHCP. They are named LAN1 and LAN2. Thissection describes configuring DHCP for LAN1. Follow the same instructions to configurethe parameters for LAN2.
