Identifying the telephone (General heading) 403Programming Operations GuideIdentifying the telephone (General heading)The General heading allows you to assign the name, the DN type or model, a control telephone,and a call log password for a telephone. This record also shows you which physical port thetelephone is accessing.Figure 126 DN General screen for digital and IP telephonesFollow these steps to identify a new telephone, that has not yet been attached to the system:1 Click on the keys beside Services, Telephony Services, System DNs, and Inactive DNs.2 Click on the key beside the heading that indicates the type of telephone you are installing.For example, click on the key beside Set DNs to program digital telephones or IP telephones.3 Click the telephone record (DN XXX).4 Click General.Caution: Caller ID set (DNXXX, Line Access, Line Assignment, Line XXX).You can only enable Caller ID Set (target lines and analog devices attached to an GASM)on a maximum of 30 telephones. If you attempt to copy an enabled setting to more than 30sets, you will receive an error message.** ISDN/DECT, and Companion recordshave a DN Type field instead of a Model fieldand they do not have a Device Port field.*
