Configuring an analog device DN record 879Programming Operations GuideGeneral headingThe General heading allows you to assign a name to the analog device and to view thephysical port number assigned to the DN.1 From Unified Manager, click on the keys beside Services, Telephony Services, System DNs,and Active set DNs.Figure 222 Active set DN screen example2 Click on the key beside Set DNs.3 Click on the DN record (DN XXXX) for an analog device.4 Click on the General heading.Figure 223 General screen example5 Use the table below to assign a name to the analog device.Table 285 General record fieldsAttribute Values DescriptionName alphanumeric characters>This setting shows the DN number for the analog device.Use this setting to provide a more specific description of the device, suchas the last name of the user or the device location.Model Other This is a read-only setting when the analog device is installed on thesystem.Other represents analog devices.
