806 Implementing Quality of Service (QoS)N0008589 3.3Deleting an IP filter configurationTo delete an IP filter configuration:1 On the navigation tree, click the Services key and click the Policy Management key.2 Click the QoS key and click the Rules heading.3 Click the entry you want to delete.4 On the Configuration menu, click Delete IP Filter Entry.A confirmation dialog box opens.5 Click the Yes button to delete the IP Filter Table entry.Creating an IP filter group entryIP filter groups allow you to assign IP filters to a Policy. An IP filter group can consist of one toseveral IP filters.When you create an IP filter group, you choose the IP filters to add and you specify the order inwhich the IP filters are applied.The maximum number of IP Filter Group entries you can add to a QoS Policy is 31.To create an IP filter group table entry:1 On the navigation tree, click the Services key and click the Policy Management key.2 Click the QoS key and click the Rules heading.3 Click the IP Filter Group Table tab.4 On the Configuration menu, click Add IP Filter Group Entry.The IP Filter Group Table dialog box opens.5 Configure the IP Filter Group parameters according to the following table.6 Click the Save button.Note: You cannot delete a filter if it is referenced in a filter group.Table 248 QoS IP Filter Group parametersAttribute DescriptionFilter Group Name Enter the name of the filter group.Filter Order Enter the name of the filter to add to the filter group. If you are adding more than one filter,separate the filter names by a comma.The filters are used in the order you specify.
