Understanding BCM SSL certificate properties 71Programming Operations Guide8 Click the Upload button.Upload messages:• If the upload is successful:Certificate and Private Key Upload Was Successful!You must restart the Apache Service or Restart the BCM before theSettings will take Effect.• If the upload is unsuccessful:Certificate and Private Key Upload Was NOT Successful!The Certificate and Private Key do not match.Please upload a VALID Certificate and Private Key Combination!9 Click on the BCM link beside Your Location to exit the maintenance pages.10 To replace the default certificate with the new certificate and private key:a Exit the Unified Manager.b Log back into the Unified Manager.Troubleshooting: Restoring the default certificateIf something happens to your private security certificate file, you cannot access the UnifiedManager and you need to restore the default certificate. Contact your technical support team forassistance. Refer to “How to get help” on page 62 for Nortel Networks support contact numbers.Suppressing the security alert messageIf you do not want to add a site-specific security certificate, but you want to suppress the securityalert message, you can use the Internet Explorer Security options to disable the warning.1 Open Internet Explorer.2 On the top menu bar, click Tools and select Internet Options.3 Select the Advanced tab.Note: Location of the following prompt may vary, depending on the version of InternetExplorer.4 Scroll to the item “Warn about invalid site certificates.”5 If the check box has a check mark, click on the box to remove it. This disables this option.6 Restart the browser.Using the non-secure http:6800 portIf you choose not to use SSL on your system, you can disable the system prompt that forces secureweb access. Refer to “Setting system security compatibility levels” on page 119. On the Securityscreen described in that section, choose Disabled for the Force Secure Web Access field.
