Configuring an analog device DN record 883Programming Operations GuideFigure 227 Capabilities fields screen example3 Use the information in the following table to configure seven specific capabilities fields (ifrequired) for an analog device.Table 288 Capabilities fieldsAttribute Values DescriptionHandsfree AutoStandardNoneSet this value to None for analog devices.HF answerback Y or N Set this value to N for analog devices.Pickup group None1 to 9This setting is for analog telephones.Assigns an analog telephone to a pickup group.This is a group where all telephones ring until one is answered.For more information on Call Park pick up groups, refer to the BusinessCommunications Manager Telephony Features Handbook.Page zone Page Zone(1 to 6)NoneThis setting is for analog telephones.Assigns an analog telephone to a page zone.A zone is any group of telephones that you want to group together for pagingregardless of their location. You can assign one of six zones to each telephone.*******
