YASKAWA E-S Series Product Manual

Contents

10.1 Alarm and Warning Displays10.1.4 List of Warnings10-1510 Maintenance10.1.4 List of WarningsThe list of warnings gives the warning name and warning meaning in order of the warning num-bers.Note: If you set Pn008 to n.1 (Do not detect warnings), no warnings will be detected.Warnings are displayed to warn you before an alarm occurs. Warnings are reset automatically.WarningNumber Warning Name MeaningA.900 Position DeviationOverflow The position deviation exceeded the following value:A.901Position DeviationOverflow Alarm atSERVO ONThe position deviation exceeded the following value in the SERVO ONstate:A.910 Overload This warning occurs before an overload alarm (A.710 or A.720) occurs. Ifthe warning is ignored and operation is continued, an alarm may occur.A.941 Change of ParametersRequires RestartParameters have been changed that require the power supply to beturned OFF and ON again.A.A9F Motion Error WarningA warning occurred in the motion control section of the SERVOPACK.Refer to the following section for information on errors.10.1.6 List of Errors on page 10-17Use the error monitor in the Motion Monitor Window of the SigmaWin+to check error numbers.NotePn520 × Pn51E100Pn526 × Pn528100