YASKAWA E-S Series Product Manual

Contents

11.1 List of Parameters11.1.2 List of Parameters11-711 Parameter ListPn40D 2Second StageNotch Filter QValue50 to 1,000 0.01 70 Immedi-ately Tuning page 8-35Pn40E 2 Second StageNotch Filter Depth 0 to 1,000 0.001 0 Immedi-ately Tuning page 8-35Pn4602Notch FilterAdjustmentSelections0000h to0101h − 0101h Immedi-ately Tuning page 8-15Pn502 2 RotationDetection Level 1 to 10,000 1 min -1 30 Immedi-ately Setup page 5-15Pn503 2SpeedCoincidenceDetection SignalOutput Width0 to 100 1 min -1 30 Immedi-ately Setup −Pn506 2BrakeReference-SERVOOFF Delay Time0 to 50 10 ms 0 Immedi-ately Setup −Pn507 2Brake ReferenceOutput SpeedLevel0 to 10,000 1 min -1 100 Immedi-ately Setup −Pn508 2SERVO OFF-Brake ReferenceWaiting Time10 to 100 10 ms 50 Immedi-ately Setup −Pn51E 2Position DeviationOverflow WarningLevel10 to 100 1% 100 Immedi-ately Setup page 10-15Pn520 4Position DeviationOverflow AlarmLevel1 to1,073,741,8231 refer-ence unit 25600 Immedi-ately Setup page 8-5,page 10-3Pn526 4Position DeviationOverflow AlarmLevel at SERVOON1 to1,073,741,8231 refer-ence unit 25600 Immedi-ately Setup page 8-5Pn528 2Position DeviationOverflow WarningLevel at SERVOON10 to 100 1% 100 Immedi-ately Setup page 8-5Pn529 2 Speed Limit Levelat SERVO ON 0 to 10,000 1 min -1 10000 Immedi-ately Setup page 8-5Pn52B 2 Overload WarningLevel 1 to 100 1% 20 Immedi-ately Setup page 5-28Continued on next page.Continued from previous page.ParameterNo. Size Name SettingRangeSettingUnitDefaultSettingWhenEnabledClassi-fication Referencen.X Notch Filter Adjustment Selection 10 Do not adjust the first stage notch filter automatically during execution of customtuning.1 Adjust the first stage notch filter automatically during execution of custom tuning.n.X Reserved parameter (Do not change.)n.X Notch Filter Adjustment Selection 20 Do not adjust the second stage notch filter automatically during execution of cus-tom tuning.1 Adjust the second stage notch filter automatically during execution of custom tun-ing.n.X Reserved parameter (Do not change.)