YASKAWA E-S Series Product Manual

Contents

11.1 List of Parameters11.1.2 List of Parameters11-16PnBAC2/SEL5 (ProgramStep SelectionInput 5) SignalAllocation0000h to00C3h − 00A0h Afterrestart Setup page 5-11PnBAF2/S-ON (SERVOON) Signal Alloca-tion0000h to00C3h − 00B0h Afterrestart Setup page 5-12Continued on next page.Continued from previous page.ParameterNo. Size Name SettingRangeSettingUnitDefaultSettingWhenEnabledClassi-fication Referencen.X Signal Usage Method0 The /SEL5 (Program Step Selection Input) signal is active when the input signal isON (closed).1 The /SEL5 (Program Step Selection Input) signal is active when the input signal isOFF (open).2 The /SEL5 (Program Step Selection Input) signal is always active.3 The /SEL5 (Program Step Selection Input) signal is always inactive.n.X Signal Terminal NumberSame as PnBA0 = n.X.n.X Reserved parameter (Do not change.)n.X Reserved parameter (Do not change.)n.X Signal Usage Method0 The system changes to the SERVO ON state (power is supplied) and operation isenabled when the input signal turns ON (closes).1 The system changes to the SERVO ON state (power is supplied) and operation isenabled when the input signal turns OFF (opens).2 The system is always in the SERVO ON state.3 The system is always in the SERVO OFF state.n.X Signal Terminal NumberSame as PnBA0 = n.X.n.X Reserved parameter (Do not change.)n.X Reserved parameter (Do not change.)