YASKAWA E-S Series Product Manual

Contents

11.1 List of Parameters11.1.2 List of Parameters11-1911 Parameter ListPnBC02/INPOSITION(PositioningCompletionOutput)Signal Allocation0000h to00C2h − 0000h Afterrestart Setup page 5-13PnBC12/POUT0(Program StepNumber Output 0)Signal Allocation0000h to00C2h − 0010h Afterrestart Setup page 5-14Continued on next page.Continued from previous page.ParameterNo. Size Name SettingRangeSettingUnitDefaultSettingWhenEnabledClassi-fication Referencen.X Signal Usage Method0 Turn ON (close) the output when positioning is completed.1 Turn OFF (open) the output when positioning is completed.2 Do not use this signal.n.X Signal Terminal Number0 Output signal from CN1-18.1 Output signal from CN1-20.2 Output signal from CN1-21.3 Output signal from CN1-22.4 Output signal from CN1-23.5 Output signal from CN1-24.6 Output signal from CN1-25.7 Output signal from CN1-26.8 Output signal from CN1-27.9 Output signal from CN1-28.A Output signal from CN1-29.B Output signal from CN1-30.C Output signal from CN1-31.n.X Reserved parameter (Do not change.)n.X Reserved parameter (Do not change.)n.X Signal Usage Method0 Turn ON (close) the output when program step number output 0 is 1.1 Turn OFF (open) the output when program step number output 0 is 1.2 Do not use this signal.n.X Signal Terminal NumberSame as PnBC0 = n.X.n.X Reserved parameter (Do not change.)n.X Reserved parameter (Do not change.)