YASKAWA E-S Series Product Manual

Contents

11.1 List of Parameters11.1.2 List of Parameters11-12PnBA22/STOP(Program TableOperation StopInput)Signal Allocation0000h to00C3h − 0020h Afterrestart Setup page 5-10PnBA32/JOGP(Forward JogInput)Signal Allocation0000h to00C3h − 0050h Afterrestart Setup page 5-11PnBA42/JOGN(Reverse JogInput)Signal Allocation0000h to00C3h − 0060h Afterrestart Setup page 5-11Continued on next page.Continued from previous page.ParameterNo. Size Name SettingRangeSettingUnitDefaultSettingWhenEnabledClassi-fication Referencen.X Signal Usage Method0 Stop program table operation when the /STOP signal turns ON (closes).1 Stop program table operation when the /STOP signal turns OFF (opens).2, 3 Program table operation is not stopped.n.X Signal Terminal NumberSame as PnBA0 = n.X.n.X Reserved parameter (Do not change.)n.X Reserved parameter (Do not change.)n.X Signal Usage Method0 Jog forward while the input signal is ON (closed).1 Jog forward while the input signal is OFF (open).2, 3 Forward jog operation is not performed.n.X Signal Terminal NumberSame as PnBA0 = n.X.n.X Reserved parameter (Do not change.)n.X Reserved parameter (Do not change.)n.X Signal Usage Method0 Jog in reverse while the input signal is ON (closed).1 Jog in reverse while the input signal is OFF (open).2, 3 Reverse jog operation is not performed.n.X Signal Terminal NumberSame as PnBA0 = n.X.n.X Reserved parameter (Do not change.)n.X Reserved parameter (Do not change.)