8.6 Standard toolsGeneralAll service (repairs, maintenance, and installation) procedures contains lists oftools required to perform the specified activity.All special tools required are listed directly in the procedures while all the toolsthat are considered standard are gathered in the standard toolkit and defined inthe following table.This way, the tools required are the sum of the standard toolkit and any tools listedin the instruction.Contents, standard toolkitToolQtyRing-open-end spanner 8-19 mm1Socket head cap 2.5-17 mm1Torx socket no: 20-601Torque wrench 10-100 Nm1Small screwdriver1Plastic mallet1Ratchet head for torque wrench 1/2"1Socket head cap no: 5, socket 1/2" bit L 20 mm1Socket head cap no: 6, socket 1/2" bit L 20 mm1Socket head cap no: 8, socket 1/2" bit L 20 mm1Small cutting plier1T-handle with ball head1Product manual - IRB 1600/1660 3833HAC026660-001 Revision: W© Copyright 2006-2018 ABB. All rights reserved.8 Reference information8.6 Standard tools
