Contents - Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview of this manual
- Product documentation
- How to read the product manual
- Safety
- Protective stop and emergency stop
- Safety actions
- Emergency release of the robot axes
- Make sure that the main power has been switched off
- Safety risks
- Moving robots are potentially lethal
- First test run may cause injury or damage
- Work inside the working range of the robot
- Enabling device and hold-to-run functionality
- Risks associated with live electric parts
- The unit is sensitive to ESD
- Hot parts may cause burns
- Safety risks related to pneumatic/hydraulic systems
- Brake testing
- Safety risks during handling of batteries
- Safety risks during work with gearbox lubricants (oil or grease)
- Safety signals and symbols
- Safety symbols on product labels
- Installation and commissioning
- Unpacking
- Working range
- Risk of tipping/stability
- On-site installation
- Lifting and turning a suspended mounted robot
- Manually releasing the brakes
- Orienting and securing the robot
- Setting the system parameters for a suspended or tilted robot
- Loads fitted to the robot, stopping time and braking distances
- Fitting equipment on the robot (robot dimensions)
- Installation of signal lamp for 1600 (option)
- Installation of signal lamp for 1600ID/1660ID (option)
- Installation of the wire feeder shelf for 1600ID/1660ID
- Restricting the working range
- Installation of additional mechanical stops on axis 1
- Installation of additional mechanical stop on axis 2
- Installation of additional mechanical stops on axis 3
- Installation of position switch, axis 1
- Electrical connections
- Robot cabling and connection points
- Customer connections on the robot
- Start of robot in cold environments
- Maintenance
- Maintenance schedule and expected component life
- Maintenance schedule
- Expected component life
- Inspection activities
- Inspecting information labels
- Replacement activities
- Changing the oil in axes 5 and 6 gearboxes
- Changing the oil in axes 5 and axis 5 and 6 gearboxes, IRB 1600ID/1660ID
- Replacing the battery pack
- Cleaning activities
- Repair
- General procedures
- Mounting instructions for bearings
- Mounting instructions for seals
- Cut the paint or surface on the robot before replacing parts
- The brake release buttons may be jammed after service work
- Complete manipulator
- Replacing the cable harness, 1600ID/1660ID
- Replacement of complete arm system
- Upper and lower arm
- Replacing the complete upper arm, IRB 1600ID/1660ID
- Replacing the complete lower arm
- Replacing the wrist unit, IRB 1600
- Replacing the wrist unit, IRB 1600ID
- Replacing the wrist unit, IRB1660ID
- Replacing the damper, axis 2
- Replacing the damper, axis 3
- Replacing the mechanical stop axis 3, IRB 1600ID/1660ID
- Replacement of damper, axis 5
- Remove upper arm AW Gun
- Measuring the play 1600ID/1660ID, axis 5
- Measuring the play 1600ID/1660ID, axis 6
- Frame and base
- Replacing the serial measurement unit
- Replacing the push button unit
- Motors
- Replacement of motor, axis 2
- Replacement of motor, axis 3, IRB 1600
- Replacement of motor, axis 3, 1600ID/1660ID
- Replacement of motor, axis 4, IRB 1600
- Replacement of motor, axis 4, 1600ID/1660ID
- Replacement of motor and timing belt, axis 5, IRB 1600
- Replacement of motor, axis 5, IRB 1600ID
- Replacement of motor, axis 5, IRB 1660ID
- Replacement of motor and timing belt, axis 6, IRB 1600
- Replacement of motor, axis 6, IRB 1600ID
- Replacement of motor, axis 6, IRB 1660ID
- Gearboxes
- Service work on gearboxes, axes 3, 4, 5 and 6
- Calibration
- Calibration methods
- When to calibrate
- Synchronization marks and axis movement directions
- Calibration movement directions for all axes
- Updating revolution counters
- Calibrating with Axis Calibration method
- Calibration tools for Axis Calibration
- Installation locations for the calibration tools
- Axis Calibration - Running the calibration procedure
- Calibrating with Calibration Pendulum method
- Verifying the calibration
- Checking the synchronization position
- Decommissioning
- Scrapping of robot
- Robot description
- Type A of IRB 1600ID
- Reference information
- Applicable standards
- Unit conversion
- Screw joints
- Weight specifications
- Standard tools
- Special tools
- Lifting accessories and lifting instructions
- Spare part lists
- Circuit diagram
- Index
|
10 Circuit diagram10.1 Circuit diagramsOverviewThe circuit diagrams are not included in this manual, but are available for registeredusers on myABB Business Portal, www.myportal.abb.com.See the article numbers in the tables below.ControllersArticle numbers for circuit diagramsProduct3HAC024480-011Circuit diagram - IRC53HAC049406-003Circuit diagram - IRC5 Compact3HAC026871-020Circuit diagram - IRC5 Panel Mounted Con-troller3HAC024120-004Circuit diagram - Euromap3HAC057185-001Circuit diagram - Spot welding cabinetRobotsArticle numbers for circuit diagramsProduct3HAC031408-003Circuit diagram - IRB 1203HAC6816-3Circuit diagram - IRB 140 type C3HAC025611-001Circuit diagram - IRB 2603HAC028647-009Circuit diagram - IRB 3603HAC036446-005Circuit diagram - IRB 4603HAC025691-001Circuit diagram - IRB 6603HAC025691-001Circuit diagram - IRB 7603HAC046307-003Circuit diagram - IRB 12003HAC2800-3Circuit diagram - IRB 14103HAC021351-003Circuit diagram - IRB 1600/16603HAC039498-007Circuit diagram - IRB 15203HAC6670-3Circuit diagram - IRB 24003HAC029570-007Circuit diagram - IRB 26003HAC9821-1Circuit diagram - IRB 4400/4450S3HAC029038-003Circuit diagram - IRB 46003HAC8935-1Circuit diagram - IRB 6400RF3HAC13347-1Circuit diagram - IRB 6600 type A3HAC025744-0013HAC13347-1Circuit diagram - IRB 6600 type B3HAC025744-001Continues on next pageProduct manual - IRB 1600/1660 3893HAC026660-001 Revision: W© Copyright 2006-2018 ABB. All rights reserved.10 Circuit diagram10.1 Circuit diagrams
|
