Zeiss LSM 510 Manual

Also see for LSM 510: Quick start

LSM 510 OPERATION IN EXPERT MODELSM 510 META Acquire Menu Carl Zeiss03/06 B 45-0021 e 4-394.5.1 Laser ControlThe Lasers panel shows the types, excitationwavelengths and operating status of all lasersavailable. The addition (LSM) indicates the laserswhich are provided for imaging and manipulationthrough the LSM 510 or LSM 510 META scanhead. All other lasers are only available for ma-nipulation using the LSM DuoScan.The subordinate laser settings panel shows therelevant and currently set Maximum Power,Wavelength, Status, Tube Current andOutput [%] values of the current laser. Thebuttons On, Off and Standby permit the currentlaser to be set in the required status, and the laserintensity (Output) can be set using the slider or the input box. The name of the selected laser (Enterprise,Argon, HeNe1, HeNe2 etc.) is displayed in the headline of this setting panel for checking.4.5.1.1 Opening / Closing the Laser Control Window• Click on the Laser button in the Acquire subordinate toolbar.− This opens the Laser Control window, which shows all lasers connected to the system.When the setting of the required lasers has been finished, the Laser Control window can be closedagain.• Click on the Close button to close the Laser Control window.− The Laser Control window will be closed.4.5.1.2 Function DescriptionLasers panel (upper) List of available lasers, including the display of relevant wavelengths andswitching status.Selection of the laser to be switched on / off and setting of the laseroutput is performed in the subordinate setting panel.Laser Settings panel (lower) Switch on / off the required laser or set Standby operation.Display Maximum Power, Wavelength, Status and Tube Current (onlyEnterprise and Argon) of the relevant laser.Set the laser output for Enterprise and Argon.Fig. 4-26 Laser Control window