Zeiss LSM 510 Manual

Also see for LSM 510: Quick start

OPERATION IN EXPERT MODE LSM 510 DuoScanCarl Zeiss Process Menu LSM 510 META DuoScan4-142 B 45-0021 e 03/064.6.9.3 Interpolation PanelIn the Interpolation panel, the parameters for theinterpolation procedure are set.• Use the Start Image slider to select the slice atwhich the interpolation procedure shall start.Clicking on the First button permits the fastselection of the first slice in the series.• Use the Brightness and Contrast sliders to setthe image brightness and contrast for the firstslice (Start Image).• Use the End Image slider to select the slice atwhich the interpolation procedure shall end.Clicking on the Last button permits the fastselection of the last slice in a series.• Use the Brightness and Contrast sliders to setthe image brightness and contrast for the lastslice (End Image).• Use the available Channel buttons (e.g.: Ch1) to select the channel for interpolation or click on the Allbutton if the entire image is to be interpolated.• Having set the parameters, click on the Apply button. Interpolation will be performed in a new ImageDisplay window.• The newly created image (series) can be stored using the Save As function.If you activate the Overwrite Source Images check box, interpolation will be performed in thecurrent Image Display window.If you activate the Ignore Images less than "Start Image" and greater than "End Image"check box, only the slices lying between Start Image and End Image will be taken intoconsideration for interpolation. Otherwise, brightness and contrast will also be changed for theother slices.Fig. 4-127 Interpolation panel