Zeiss LSM 510 Manual

Also see for LSM 510: Quick start

OPERATION IN EXPERT MODE LSM 510 DuoScanCarl Zeiss Acquire Menu LSM 510 META DuoScan4-110 B 45-0021 e 03/06• Click on the Delete button. The set will be removed.The Time buttons can also be activated via keys 1 to 4 of the Trigger Control.• Click on the required Time button.• Open the Trigger in list box with a click on the arrow button.• Choose one of the trigger keys 1 to 4 (e.g. Trigger3).It is also possible to trigger an out signal via Trigger Control.• Click on the required Time button.• Open the Trigger out list box with a click on the arrow button.• Choose one of the trigger keys 1 to 4 (e.g. Trigger3).In this example, the relevant Time button is activated on pressing key 3 of the Trigger Control, and anout signal is given at the same time.The delays or time intervals can be changed online with a click on another Time button. Thenew delay will be applied immediately.A change of the delay during a Time Series is displayed in the Image Display window if theGallery button (Display toolbar) is activated.4.5.6.5 Marker PanelThe setting of a marker permits information aboutthe moment in the current time series and anyrequired comment to be assigned to the currentscan. The time indication is set automatically, whilecomments must be defined before.The markers (red squares) are visible in the ImageDisplay window if the Gallery button (Displaytoolbar) is activated.On storage of the image, all the markers, includingthe time indication and the comments, are storedalong with the image contents.Function descriptionMarker list box List of the stored combinations of markers.Apply button Application of the marker combinations selected from the list box.Store button Storage of a combination of markers.Delete button Deletion of a combination of markers from the Marker list box.Fig. 4-92 Marker panel