Zeiss LSM 510 Manual

Also see for LSM 510: Quick start

LSM 510 LSM 510 AND LSM 510 META - SETUP REQUIREMENTSLSM 510 META Space Requirements Carl Zeiss03/06 B 45-0021 e 2-92.1.6.2 Coherent "Verdi Mira" or Spectra Physics “Millenia Tsunami”. Directly-coupled withupright or inverted Microscope: 3,5 m x 3,5 mFig. 2-8 Space requirements for Two Photon Laser andLarge NLO System Table. Set up of one LSM system withtwo microscopes (measurements in mm)The System Electronic Rack contains all electronics for control of the hardware components of thesystem, the power supply for the microscope, the scanning unit and the Laser Module RGB equippedwith the choice of lasers. The Laser Module RGB is set on top of the System Electronic Rack. Power supplyand cooling unit of the NLO Laser can be stored under the system table. This set up can hold twomicroscopes. Coherent “Chameleon” or Spectra Physics “Mai Tai” lasers can also be used. With theextension of LSM DuoScan (VIS and/or 405 nm) the Laser Module LIVE is situated in the System ElectronicRack. The electronics for the NLO laser have to be set aside the System Electronic Rack. An additional labcart (000000-0465-515) is recommended. With the extension of the LSM DuoScan UV only additionalspace is required to set up the UV laser (see chapter 2.1.4).