Zeiss LSM 510 Manual

Also see for LSM 510: Quick start

OPERATION IN EXPERT MODE LSM 510 DuoScanCarl Zeiss Macro Menu LSM 510 META DuoScan4-202 B 45-0021 e 03/06The other sections contain offsets for the individual tiles.The section name has the format [Tile(xxx,yyy)] where xxx is the zero based horizontal index of the tileand yyy is the zero based vertical index of the tile.Entries:TileOffsetXTileOffsetYThe horizontal and vertical offset of the left-top corner of the tile relative to theleft-top corner of the result topography in pixels. These offset values have beencalculated with cross correlation from the original acquired stacks.TileOffsetZ The height offset for the data in the tile in meters. Note that the tile dataalready contain height corrected data and the macro writes always the value 0.By a multiple manual correction already manually corrected data could be moreeasily distinguished from uncorrected data. The value can be modified in the fileand the Load command will use this value to shift the tiles in z-direction.(6) Loading Multiple Stack filesMultiple Stack scan *.inf files can be loaded in the StitchArt plus software.