SYSTEM UTILITIES9-18 Edition One XC1000 Service4. Select Y to execute the expansion. The following prompt appears:EXPANDING...EXPANSION SUCCESSFULLY COMPLETEPRESS ANY KEY TO CONTINUE5. Press any key to return to the INSTALL OPTIONS:menu.9.4.12 Install-Option T – SELECT TERMINAL TYPESelect install-option T to display or change the terminal type currentlyselected. Three terminal types can be selected: the Wyse 50/HP 700/43,the AT&T Teletype 4425/5425, or the DEC VT102/220. Select the Wyse/HPif a Wyse 50 or HP 700/43 is installed.The terminal-type menu can also be displayed by entering ^DR at theENTER BOOT COMMAND: prompt. For a complete description of terminal-type selection, refer to section 9.6.3.9.4.13 Install-Option V – MULTIPLE TERMINAL ACCESS CONTROLUse install-option V to enable the optional multiple-terminal-access (MTA)feature. The MTA feature allows up to six administrator terminals to accesscertain maintenance and administration menus simultaneously from asingle XC1000. MTA comprises the MTA personal computer, the MTA portbox (through which the administrator terminals and the XC1000 areconnected), and the software in XC1000 that supports the MTA feature.When the MTA feature is purchased from Octel, Installation Instructions,P/N 181–1036–002, Revision B, are provided with a detailed description ofand procedures for installing the feature. Perform the following steps duringMTA installation:1. Select option V from the INSTALL OPTIONS: menu, and the followingprompts appear:MULTIPLE TERMINAL ACCESS IS CURRENTLY DISABLED.ENTER Y TO ENABLE OR N TO DISABLE MULTIPLE TERMINALACCESS (Y/N):2. The default setting for this feature is DISABLED. Enter Y to enableMTA.9.5 COPY OPTIONS: MENUPerform the following steps to access and use the COPY OPTIONS: menu:1. To enter the COPY OPTIONS: menu, enter ^DC at the ENTER BOOTCOMMAND: prompt. Figure 9-6 shows all the options for this menu.SECTION 9.4 – 9.5
