1515-1Edition OneXC1000 ServiceRELEASE 3.02 ONLINE UPGRADE INSTRUCTIONS15.1 OVERVIEWThis procedure differs significantly from previous upgradeprocedures. Take time to review this entire documentcarefully before beginning an online upgrade.Caution!An online upgrade from Release 3.0 to Release 3.02 differs from upgradesfor prior software releases. Before Release 2.X, upgrades consisted ofcopying software and phrases from a master drive to the XC1000. Upgradesfrom Release 2.X to 3.00 consisted of an FCP conversion, which is anupgrade performed on an offline XC1000 using a PC with Octel-proprietarysoftware and phrase diskettes.An online upgrade is similar to an FCP conversion; both use a PC withOctel-proprietary software and phrases. Equipment required to perform anonline upgrade is listed in section 15.3.The following prerequisites must be considered before beginning an onlineupgrade: The XC1000 must function correctly at Release 3.0. Resolve any errorsentered in the status log. System-drive 0 area A must be redundant with system-drive 1area A,and system-drive 0 area B must be redundant with system-drive 1area B. When instructed to press ^C, press the Ctrl (^) and C keys simulta-neously. An online Help option is available during the upgrade. Press the F1 keyfrom any screen to access the online Help option. Section 15.16 containsthe text of the online Help option.15.2 CHECK THE MAJOR STEPSThe following major steps are required for performing an online upgradefrom Release 3.0 to 3.02:Do not skip around this procedure! This procedurediffers significantly from previous upgrade procedures.Perform all steps in sequence or the upgrade could fail.Caution!
