RELEASE 3.0 SYSTEM UTILITIES16-44 Edition One XC1000 Service16.9.3 Message Id to Physical AddressUse the Message Id to Physical Address utility to display the physicaladdress of a message, based on the message ID. The utility requires thatthe message ID and scramble code be entered, after which the drive,cylinder, head, and sector number are displayed.Perform the following steps to displaythe physical address:1. From the Message Utilities menu (Figure 16-41), type the numbercorresponding to the Message Id to Physical Address utility.2. At the Enter Message Id (Hex): prompt, enter the message ID, inhexadecimal.3. At the Scramble Code (Hex): prompt, enter the scramble code, inhexadecimal. The XC1000 displays the drive, cylinder, head, andsector number.4. Press any key to return to the Message Utilities menu.Figure 16-44 is an example of a completed screen for this utility.Enter Message Id(Hex): c243Enter Scramble Code(Hex): c668Physical Address is:–Drive 3 Cylinder 0048 Sector 0036 Head 0006Press any key to continue.Figure 16-44. Example of Prompts and Responses forthe Message Id to Physical Address Utility.16.10 SMT DEBUG UTILITYUse the SMT Debug utility as an alternative method for accessing thereformat menu. This option is available on menu 20 (Figure 16-1). Use oneof the following methods to access the reformat menu: At the SMT Main Menu, type the current date at the Enter MenuSelection Number: prompt to access the service (>) prompt. At the >prompt, type REFORMAT to access the reformat menu. With Release 3.0, the reformat menu can also be accessed as follows:a. From menu 20 (Figure 16-1), enter the item number that corre-sponds to SMT Debug Utilities at the Enter Choice: prompt. The> prompt appears.b. From this prompt, type REFORMAT to access the reformat menu.The reformat menu functions the same as in previous softwarereleases (refer to section 9.7).SECTION 16.9 – 16.10
