RELEASE 3.0 SYSTEM UTILITIES16-46 Edition One XC1000 Service1. From menu 20 (Figure 16-1), type the corresponding menu-itemnumber at the Enter Choice: prompt to access the Toggle ExtendedPrint utility.2. If extended print is on, the Extended print is ON change to OFF(y/n): prompt appears. Enter Y to turn extended print off or N to leaveextended print on.3. If extended print is off, the Extended print is OFF change to ON(y/n): prompt appears. Enter Y to turn extended print on or N to leaveextended print off.The XC1000 automatically returns to menu 20.16.13 HIGHLIGHTS In software Release 3.0, Menu 20 – Service Operations allows service-operations utilities to be accessed both online and offline. The utilities are accessed differently, depending on whether theXC1000 is in the offline or online mode. Menu 20 in the offline modehas the following utilities, which are not available in the online mode: Drive Copy UtilitiesInitialize DriveCreate Backup DriveCopy System Data Tables Drive Replacement Utilities (All) Drive Install Utilities (All) Miscellaneous UtilitiesInitialize DriveClear Bad Write TableReset CDR PointersInitialize System Datafile UtilitiesExpand Datafile SizeDecrease Datafile Size Display Status Log System drives have two separate areas (area A and area B) for storingdifferent versions of software. The contents of areas A and B on asingle drive need not be redundant Phrases are now stored on disk using the same format as messages. Information is organized on the drives using database files, calleddatafiles, instead of records. Therefore, new utilities are now availableto access these datafiles. Message addresses are now stored according to the message ID andSC. Therefore, new utilities are now available to read messages.SECTION 16.12 – 16.13
