RELEASE 3.0 SYSTEM UTILITIES16-45Edition OneXC1000 Service16.11 DISPLAY STATUS LOGUse the Display Status Log utility to display the status log. This utilityfunctions the same as when option 2 is selected from menu 13. TheDisplay Status Log utility displays the software releases and scrollsstatus-log entries down the screen. This utility is available only in theoffline mode. For online, use menu 13. Figure 16-45 is an example of thescreen that appears when the Display Status Log utility is chosen.19 JAN 94 03:44:44PM Octel MASTERVPMOD Serial # ........ 1000 Software Release ...... 3.00Card 2 M Prom: e2.10 Disk: CM.00 Card 1 F Prom: e3.11 Disk: 35.28Card 8 L DLC: NA. T1/E1: NA.Line Card Digitization Rate: B Telephone System Type: 1 – North AmericanBoot Prom ........ 93.11 IPL Extension .... 3A.10 DLC .............. B1.28Menus ............ 33.87 Termcap .......... 33.13 DSP .............. 07.10ACP188 ........... NA. ACP386 ........... NA. T1/E1 ............ NA.UDLC ............. NA. UDSP ............. NA.Operating System .......... 94.3A.34 System Services ........... 93.3A.34System Manager ............ 94.3A.4419 JAN 94 10:49:32AM*** Disk Drive Ceased Running>>> NOTIFY SUPPORT REPRESENTATIVE00000 64C09E02 CE000000 000020E9 AB500100 *d......... ..P..*00010 02020000 01000001 02020000 00000002 *................*00020 F6030000 3400FFFF 00E00100 00000000 *....4...........*00030 9E014400 00000000 00000000 00000000 *..D.............*00040 9E014509 010000F0 53D75300 00000000 *..E.....S.S.....*00050 01000900 07000000 A80E780E 34003400 *..........x.4.4.*00060 D1121F00 *.... *Press ”P” to print status log, ”C” to clear log or any other key to return tooption selection:Figure 16-45. Example of the Display Status Log Utility.16.12 TOGGLE EXTENDED PRINTUse the Toggle Extended Print utility to toggle the display of details whencertain utilities are run. Extended print refers to the variable informationdisplayed on the screen while certain utilities are run. For example, whenthe Make Phrase Areas A and B Redundant utility runs, phrases arechecked. If extended print is on, the XC1000 displays the message IDs asthey are processed. If extended print is off, the XC1000 does not displaythe message IDs. If a printer is attached to the system and is online,information displayed on the screen is sent to the printer. However, thevariable information sent to the printer is continuously overwritten and isunreadable. It is recommended that extended print be turned off whenevera printer is connected to the XC1000 while running a utility that displaysvariable information.Selecting this utility while extended print is on displays a prompt to turnextended print off. Selecting this utility while extended print is off displaysa prompt for turning extended print on. To toggle extended print, performthe following steps:SECTION 16.11 – 16.12
