Chapter 6: Using the Web Interface205 To retrieve the exact data at a particular time, hover your mouseover the data line in the chart. Both the time and data aredisplayed as illustrated below.To configure this outlet's threshold settings:Per default, there are pre-defined RMS voltage and current thresholdvalues in related fields. SeeDefault Voltage and Current Thresholds(on page 769). You can modify the defaults as needed.Note: The threshold values set for an individual outlet will override thebulk threshold values, if any, stored on that particular outlet. See BulkConfiguration for Outlet Thresholds(on page 195).1. If the outlet's threshold data is invisible, click the Thresholds titlebar to display it.2. Click the desired sensor (required), and then click Edit Thresholds.
