Chapter 8: Using the Command Line Interface488Authentication SettingsGeneral authentication settings:This command displays the authentication settings of the PX3TS,including both LDAP and Radius settings.# show authenticationOne LDAP server's settings:To show the configuration of a specific LDAP server, assign the desiredLDAP server with its sequential number in the command. To get detailedinformation, add "details" to the end of the command.# show authentication ldapServer -- OR --# show authentication ldapServer detailsOne Radius server's settings:To show the configuration of a specific Radius server, assign the desiredRadius server with its sequential number in the command. To getdetailed information, add "details" to the end of the command.# show authentication radiusServer -- OR--# show authentication radiusServer detailsVariables: is the sequential number of the specifiedauthentication server on the LDAP or Radius server list.Displayed information: Without specifying any server, PX3TS shows the authentication typeand a list of both LDAP and Radius servers that have beenconfigured. When specifying a server, only that server's basic configuration isdisplayed, such as IP address and port number.
