Chapter 6: Using the Web Interface209OCPsThe OCPs page is available only when your PX3TS has overcurrentprotectors, such as circuit breakers. Note that the OvercurrentProtectors section shows information of the circuit breakers forprotecting outlets, NOT the fuses for protecting the inlet transferswitch.Each overcurrent protector on the PX3TS draws power from the activeinlet and delivers power to associated outlets. These overcurrentprotectors prevent outlets from overload by controlling the input currentflowing through associated outlets.The OCPs page lists all overcurrent protectors as well as their status. Ifany OCP trips or its current level enters the alarmed state, it ishighlighted in red or yellow. SeeYellow- or Red-Highlighted Sensors(on page 224).To open the OCPs page, click 'OCPs' in theMenu (on page 146).You can go to each OCP's data/setup page by clicking its name on thispage.If wanted, you can resort the list by clicking the desired column header.SeeSorting a List (on page 149).Overcurrent protector overview: OCP status - open (tripped) or closed Current drawn and current barThe RMS current bars change colors to indicate the status if the OCPthresholds have been configured and enabled.
