Chapter 6: Using the Web Interface305 Deny: Rejects any user's login attempt when no matching rulesare present.4. Create rules. Refer to the tables below for different operations.ADD a rule to the end of the list Click Append. Type a starting IP address in the Start IP field. Type an ending IP address in the End IP field. Select a role in the Role field. This rule applies to members of this role only. Select an option in the Policy field. Accept: Accepts traffic from the specified IP address range when the user is amember of the specified role. Deny: Rejects the login attempt of a user from the specified IP address rangewhen that user is a member of the specified role.INSERT a rule between two rules Select the rule above which you want to insert a new rule. For example, to insert arule between rules #3 and #4, select #4. Click Insert Above. Type a starting IP address in the Start IP field. Type an ending IP address in the End IP field. Select a role in the Role field. This rule applies to members of this role only. SelectAccept orDeny in the Policy field. Refer to the above table for details.The system automatically numbers the rule.5. When finished, the rules are listed on this page.
