Chapter 6: Using the Web Interface447Section DescriptionDoor State Shows all sensor states detected by DX2-DH2C2,including:Door: States of contact closure sensors connectedto DX2-DH2C2. Contact closure sensors detectwhether the door is physically opened or closed.Door Lock: States of door locks integrated with thedoor handles.Door Handle Lock: States of the door handle locks.Door locks and door handle locks are interrelated sotheir states are changed one after another. The doorhandle lock is opened first and then the door lock.Exception: If you manually open the door lock with thekey shipped with your door handle, the Door Lockstate will enter the open state while the Door HandleLock state remains closed.Card Reader Shows the data of the smart card scanned by theinternal card reader integrated in each door handleconnected to DX2-DH2C2.Note: It is not necessary to use the internal cardreader unless you are using a third-party application,such as Power IQ, for access control. Refer to the userdocumentation of your third-party application formore information.Note that the same Card Reader information is also available on thepage ofCard Readers (on page 449).To configure the door handles:1. Click Edit Settings in the Setting section.2. In the Door Handle Type field, select the door handle type you areusing. The default is None.
