Chapter 4: Connecting External Equipment (Optional)70a. Affix the adhesive part of the asset tag to one side of a bladeserver through the tag's tape.b. Plug the tag connector of the asset tag into a tag port on theblade extension strip.4. Repeat the above step until all blade servers in the chassis areconnected to the blade extension strip via asset tags.5. Plug the tag connector of the blade extension strip into the closesttag port of the regular or composite asset strip on the rack.6. Repeat the above steps to connect additional blade extension strips.Up to 128 asset tags on blade extension strips are supported perFEATURE port.Note: If you need to temporarily disconnect the blade extension stripfrom the asset strip, wait at least 1 second before re-connecting it back,or the PX3TS device may not detect it.
