Chapter 8: Using the Command Line Interface485Environmental Sensor Threshold InformationThis command syntax shows the specified environmental sensor'sthreshold-related information.# show sensor externalsensor To show detailed information, add the parameter "details" to the end ofthe command.# show sensor externalsensor detailsExternal sensor 3 (Temperature):Reading: 31.8 deg CState: normalActive Thresholds: Sensor specific thresholdsDefault Thresholds for Temperature sensors:Lower critical threshold: 10.0 deg CLower warning threshold: 15.0 deg CUpper warning threshold: 30.0 deg CUpper critical threshold: 35.0 deg CDeassertion hysteresis: 1.0 deg CAssertion timeout: 0 samplesSensor Specific Thresholds:Lower critical threshold: 8.0 deg CLower warning threshold: 13.0 deg CUpper warning threshold: 28.0 deg CUpper critical threshold: 33.0 deg CDeassertion hysteresis: 1.0 deg CAssertion timeout: 0 samplesVariables: is the environmental sensor number. The environmental sensornumber is the ID number assigned to the sensor, which can be foundon the Peripherals page of the PX3TS web interface.
