Appendix J: Integration795Diagram keyPX rack PDUD2CIM-PWRKX IIID2CIM-PWR to rack PDU connectionD2CIM-PWR to KX III target device port via Cat5 cableNaming the Rack PDU (Port Page for Power Strips)Note: PX rack PDUs (power strips) can be named in the PX as well as inthe KX III.Once a Raritan remote rack PDU is connected to the KX III, it will appearon the Port Configuration page. Click on the power port name on thatpage to access it. The Type and the Name fields are prepopulated.Note: The (CIM) Type cannot be changed.The following information is displayed for each outlet on the rack PDU:[Outlet] Number, Name, and Port Association.Use this page to name the rack PDU and its outlets. Names can be up to32 alphanumeric characters and can include special characters.Note: When a rack PDU is associated with a target server (port), theoutlet name is replaced by the target server name, even if you assignedanother name to the outlet.To name the rack PDU and outlets:Note: CommandCenter Secure Gateway does not recognize rack PDUnames containing spaces.1. Enter the Name of the rack PDU (if needed).2. Change the [Outlet] Name if desired. (Outlet names default to theoutlet #.)
