Chapter 6: Using the Web Interface239Mode DescriptionAsset Strip,Raritan assetstrips,LHX 20,SHX 30,LHX 40,Power CIMForce the PX3TS to show the selected device'sdata/setup page regardless of the physicalconnection status.Note: 'LHX 20', 'SHX 30', and 'LHX 40' are not available when the supportof LHX/SHX heat exchangers is disabled. See Miscellaneous(on page402).Asset StripAfter connecting and detecting Raritan asset management strips (assetstrips), the PX3TS shows 'Asset Strip' in place of 'Feature Port' in themenu.Note: For connection instructions, see Connecting Asset ManagementStrips(on page 63).To open the Asset Strip page, click it in theMenu (on page 146). On thispage, you can configure the rack units of asset strips and asset tags. Arack unit refers to a tag port on the asset strips. The "Change Asset StripConfiguration" permission is required.For the functionality of this icon on the top-right corner, seeFeaturePort (on page 237).To configure asset strip and rack unit settings:1. Click Edit Settings.2. Make changes to the settings by directly typing a new value, orclicking that field to select a different option.
