Chapter 8: Using the Command Line Interface545Customizing the Date and TimeIf intending to manually configure the date and time, use the followingCLI commands to specify them.Note: You shall set the time configuration method to "manual" prior tocustomizing the date and time. See Determining the Time SetupMethod(on page 543).Assign the date:config:# time set date Assign the time:config:# time set time Variables:Variable Description Type the date in the format of yyyy-mm-dd.For example, type2015-11-30 for November 30,2015. Type the time in the format of hh:mm:ss in the24-hour format.For example, type13:50:20 for 1:50:20 pm.Setting the Time ZoneThe CLI has a list of time zones to configure the date and time for thePX3TS.config:# time zoneAfter a list of time zones is displayed, type the index number of the timezone or press Enter to cancel.ExampleTo set the time zone:1. Type the time zone command as shown below and press Enter.config:# time zone
