Chapter 6: Using the Web Interface302ADD a rule to the end of the list Click Append. Type an IP address and subnet mask in the IP/Mask field. Select an option in the Policy field. Accept: Accepts traffic from/to the specified IP address(es). Drop: Discards traffic from/to the specified IP address(es), without sending anyfailure notification to the source or destination host. Reject: Discards traffic from/to the specified IP address(es), and an ICMPmessage is sent to the source or destination host for failure notification.INSERT a rule between two rules Select the rule above which you want to insert a new rule. For example, to insert arule between rules #3 and #4, select #4. Click Insert Above. Type an IP address and subnet mask in the IP/Mask field. SelectAccept,Drop orReject in the Policy field. Refer to the above table for details.The system automatically numbers the rule.6. When finished, the rules are listed.
