Chapter 8: Using the Command Line Interface5462.The system shows a list of time zones. Type the index number of thedesired time zone and press Enter.3.Typeapplyfor the selected time zone to take effect.Setting the Automatic Daylight Savings TimeThis command determines whether the daylight savings time is appliedto the time settings.config:#time autoDST Variables:enable ordisable.ModeDescriptionenableDaylight savings time is enabled.disableDaylight savings time is disabled.ExamplesThis section illustrates several time configuration examples.Example 1 - Time Setup MethodThe following command sets the date and time settings by using the NTPservers.config:#time method ntpExample 2 - Primary NTP ServerThe following command sets the primary time server to 192.168.80.66.config:#time ntp firstServer 192.168.80.66
