Chapter 4: Connecting External Equipment (Optional)72c. Connect the other end of the cable to the RJ-45 connectorlabeled "Input" on the secondary composite asset strip.d. Repeat the same steps to connect more composite asset strips.SeeDaisy-Chain Limitations of Composite Asset Strips (onpage 73) for the maximum number of composite asset stripssupported per chain.Note: Different types of composite asset strips can be mixed in achain as of release 3.3.0.2. Connect the composite asset strip(s) to the PX3TS device via astandard network patch cable (CAT5e or higher).a. Connect one end of the cable to the RJ-45 port labeled "Input" onthe composite asset strip. For a composite asset strip chain, connect the cable to the"Input" port of the first asset strip.b. Connect the other end of the cable to the FEATURE port on thePX3TS device.3. Affix an asset tag to the IT device. Then connect this asset tag to thecomposite asset strip by plugging the tag connector into the tag porton the composite asset strip. For details, seeConnecting RegularAsset Strips to PX3TS (on page 66).4. (Optional) For a chain, it is highly recommended using the cable tiesto help hold the weight of all connecting cables.5. Repeat Step 3 to connect IT devices to the other composite assetstrips in the chain.
