Chapter 6: Using the Web Interface407Identifying Cascaded DevicesFor information on how to cascade PX3TS devices, seeCascadingMultiple PX3TS Devices for Sharing Ethernet Connectivity (on page28).This section explains how to identify a cascaded device on the DeviceInformation page.Note: For detailed information on the cascading configuration andrestrictions, see the Cascading Guide, which is available from Raritanwebsite's Support page(http://www.raritan.com/support/).To identify the USB-cascading status:1. Choose Maintenance > Device Information.2. Click the Network title bar. If the information shown on this page does not match the lateststatus, press F5 to reload it.Cascading information in the Bridging mode: The Common section contains two read-only fields for indicating thecascading status. Note that the cascading position is NOT availablein the Bridging mode.Fields DescriptionPort Forwarding Indicates the Port Forwarding is disabled. SeeSetting the Cascading Mode (on page 282).BRIDGE section Indicates the device is in the Bridging mode and itsIP address.
