Appendix J: Integration798To turn an outlet off:1. Click Off next to the outlet you want to power off.2. Click OK on the Power Off dialog.3. Click OK on the Power Off confirmation dialog. The outlet will beturned off and its state will be displayed as 'off'.To cycle the power of an outlet:1. Click Cycle next to the outlet you want to cycle. The Power Cycle Portdialog opens.2. Click OK. The outlet will then cycle (note that this may take a fewseconds).3. Once the cycling is complete the dialog will open. Click OK to closethe dialog.Dominion KSX II, SX or SX II ConfigurationRaritan PX3TS support the integration with Raritan's serial accessproducts - Dominion KSX II, Dominion SX and Dominion SX II.Cables used for connecting the PX3TS to different Dominion accessproducts are different. KSX II - a standard network patch cable (CAT5 or higher) SX - a CSCSPCS cable SX II - a CSCSPCS cableNote: To only access the CLI of the PX3TS via SX / SX II, treat the PX3TSas a serial device by connecting SX /SX II to the PDU's serial port insteadof the FEATURE port.For more information on these Dominion serial access product, refer to: KSX II, SX or SX II User Guide on theSupport page(http://www.raritan.com/support/) KSX II, SX or SX II Online Help on theProduct Online Help page(http://www.raritan.com/support/online-help/)Dominion KSX IIAfter connecting a Dominion KSX II to the Raritan PDU, you can monitorthe PDU and even control its outlets if the PDU is an outlet-switchingcapable model.
