Chapter 6: Using the Web Interface240Field DescriptionName Name for this asset strip assembly.Number of RackUnitsTotal of available tag ports on this asset stripassembly, ranging between 8 and 64. For the current generation of asset strips,which show the suffix "G3" on its hardwarelabel, the PX3TS automatically detects thenumber of its tag ports (rack units), and youcannot change this value. For old "non-G3" asset strips, there is noautomatic detection for them so you mustmanually adjust this value.Numbering Mode The rack unit numbering method in arack/cabinet.Top-Down: The numbering starts from thehighest rack unit of a rack/cabinet.Bottom-Up: The numbering starts from thelowest rack unit of a rack/cabinet.Numbering Offset The start number in the rack unit numbering.For example, if this value is set to 3, then thefirst number is 3, the second number is 4, andso on.Orientation The asset strip's orientation by indicating thelocation of its RJ-45 connector.Top Connector: The RJ-45 connector islocated on the top.Bottom Connector: The RJ-45 connector islocated on the bottom.Asset strips can detect their strip orientationand show it in this field.You need to adjust this value only when yourasset strips are the oldest ones without tiltsensors implemented.Color withconnected tagClick this field to determine the LED colordenoting the presence of an asset tag. Default is green.Color withoutconnected tagClick this field to determine the LED colordenoting the absence of an asset tag. Default is red.
