Chapter 6: Using the Web Interface395Options DescriptionForce GSM modem The PX3TS attempts to recognize that the connecteddevice is a GSM modem.2. Click the Console Baud Rate field to select the baud rate intended forconsole management.Note: For a serial RS-232 or USB connection between a computerand the PX3TS, leave it at the default (115200 bps).3. Click the Modem Baud Rate field to select the baud rate for themodem connected to the PX3TS.The following modem settings/fields appear in the web interface afterthe PX3TS detects the connection of an analog or GSM modem.To configure the analog modem:1. Select the "Answer incoming calls" checkbox to enable the remoteaccess via a modem. Otherwise, deselect it.2. Type a value in the "Number of rings before answering" field todetermine the number of rings the PX3TS must wait beforeanswering the call.To configure the GSM modem:1. Enter the SIM PIN code.2. Select the "Use custom SMS center number" checkbox if a customSMS center will be used. Enter the SMS center number in the "SMS center" field.3. If needed, click Advanced Information to view detailed informationabout the modem, SIM and mobile network.4. To test whether the PX3TS can successfully send out SMS messageswith the modem settings:a. Enter the number of the recipient's phone in the Recipient Phonefield.b. Click Send SMS Test to send a test SMS message.
