Manuals database logo
manualsdatabase
Your AI-powered manual search engine

Langer FLS 106 PCB manuals

FLS 106 PCB first page preview

FLS 106 PCB

Brand: Langer | Category: Industrial Equipment
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Declaration of Conformity
  6. General Remarks
  7. Description of Symbols
  8. Scope of Delivery
  9. Technical Parameters
  10. Technical Parameters of the Subassemblies
  11. GND 25 Holder
  12. GND 25 Ground Plane
  13. SUH 106 Safety Enclosure
  14. Requirements for the ChipScan-Scanner Software
  15. Intended Use
  16. Risks if Not Used for Its Intended Purpose
  17. Hazard Due to Movements along the Axes
  18. Safety Devices
  19. Environmental Protection
  20. Overview of the FLS 106 Scanner
  21. Guide Rails along the Y-Axis (Long Side)
  22. Gantry
  23. Aluminium Mounting Bracket
  24. T-Slot Table
  25. Control Panel with EMERGENCY STOP Device and Control LEDs
  26. ON / OFF Switch
  27. Connectors on the Control Panel
  28. Connector for External Emergency Stop Switch or Safety Enclosure
  29. Overview of Attachments
  30. DM-CAM with Camera Screw
  31. Clamping Pieces
  33. SH 01 Probe Holder
  34. Delivery
  35. Preparations for Putting the FLS 106 Scanner into Service
  36. Removing the Transport Protection from the Guide Rails
  37. Checking / Releasing the EMERGENCY STOP Switch
  38. Putting the FLS 106 Scanner into Service for the First Time
  39. Installation
  40. Checking the Cables of the Rotary Unit
  41. Installing the Digital DM-CAM Microscope Camera
  42. Installation of the Digital DM-CAM Microscope Camera on the FLS 106 PCB
  43. Connecting a Computer
  44. Switching the FLS 106 Scanner on
  45. Software Installation
  46. Installing the ChipScan-Scanner Software
  47. Putting the FLS 106 Scanner into Service with the ChipScan-Scanner Software
  48. Fastening the Device Under Test
  49. Fastening a Circuit Board with the UH DUT Universal Holder
  50. Installing the UH DUT
  51. Fastening the GND 25 Ground Plane for IC Measurements
  52. Information on Using the GND 25 Ground Plane
  53. Installing an ICR Near-Field Microprobe
  54. Connecting the ICR Near-Field Microprobe
  55. Installing the BT 706 Bias-Tee
  56. Installing a Near-Field Probe with the SH 01 Probe Holder
  57. Connecting a Near-Field Probe Directly to the FLS 106 IC Scanner
  58. Connecting a Near-Field Probe With a Pre-Amplifier
  59. Installing a Near-Field Probe on the FLS 106 PCB
  60. Connecting a Near-Field Probe Directly to the FLS 106 PCB Scanner
  61. Collision Control for the Near-Field Probe
  62. Information on How to Operate the FLS 106 Scanner
  63. Estimating the Duration of a Measurement with the FLS 106 Scanner
  64. After Completing the Measurement
  65. Removing a Device Under Test from the T-slot Table
  66. Maintenance
  67. Dismantling/Disposal
  68. Customer Service
  69. Warranty
FLS 106 PCB first page preview

FLS 106 PCB

Brand: Langer | Category: Scanner
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Declaration of Conformity
  7. General Information
  8. Description of Symbols
  9. Scope of Delivery
  10. Technical Parameters
  11. Technical Parameters of the Subassemblies
  12. GND 25 Holder
  13. GND 25 Ground Plane
  14. SUH 106 Safety Enclosure
  15. Requirements for the ChipScan-Scanner Software
  16. Intended Use
  17. Risks if Not Used for Its Intended Purpose
  18. Hazard Due to Electrical Voltage
  19. Safety Devices
  20. Environmental Protection
  21. Overview of the FLS 106 Scanner
  22. Guide Rails along the Y-Axis (Long Side)
  23. Gantry
  24. Aluminium Mounting Bracket
  25. T-Slot Table
  26. Control Panel with EMERGENCY STOP Switch and Control LEDs
  27. ON / OFF Switch and Connectors
  28. Connectors on the Z-Axis Tower
  29. Overview of Attachments
  30. DM-CAM with Camera Screw
  31. Clamping Pieces
  33. SH 01 Probe Holder
  34. Delivery
  35. Opening the Transport Box
  36. Set-Up and Preparations for Putting the FLS 106 Scanner into Service
  37. Setting up the FLS 106
  38. Removing the Protective Film
  39. Removing the Transport Protection from the Guide Rails
  40. Checking / Releasing the EMERGENCY STOP Switch
  41. Putting the FLS 106 Scanner into Service for the First Time
  42. Installation
  43. Checking the Cables of the Rotary Unit
  44. Installing the DM-CAM Digital Microscope Camera
  45. Installing the DM-CAM Digital Microscope Camera on the FLS 106 PCB
  46. Connecting a Computer
  47. Switching the FLS 106 Scanner on
  48. Software Installation
  49. Installing the ChipScan-Scanner Software
  50. Putting the FLS 106 Scanner into Service with the ChipScan-Scanner Software
  51. Fastening the Device Under Test
  52. Fastening a Circuit Board on the UH DUT Universal Holder
  53. Fastening the Circuit Board
  54. Installing the GND 25 Ground Plane for IC Measurements
  55. Installing the GND 25 Ground Plane
  56. Installing an ICR Near-Field Microprobe
  57. Connecting the ICR Near-Field Microprobe
  58. Installing the BT 706 Bias-Tee
  59. Collision Control of the ICR Probe
  60. Installing a Near-Field Probe with the SH 01 Probe Holder
  61. Connecting a Near-Field Probe Directly to the FLS 106 IC Scanner
  62. Connecting a Near-Field Probe with a Preamplifier
  63. Installing a Near-Field Probe on the FLS 106 PCB
  64. Connecting a Near-Field Probe Directly to the FLS 106 PCB Scanner
  65. Collision Control for the Near-Field Probe
  66. Operational Notes
  67. Estimating the Duration of a Measurement with the FLS 106 Scanner
  68. Memory and Storage Requirements for the Measurement
  69. After Completing the Measurement
  70. Removing the Preamplifier / BT 706 Bias Tee
  71. Maintenance
  72. Dismantling
  73. Disposal
  74. Customer Service
  75. Warranty
Related products
FLS 106 IC
Langer categories
Accessories
Industrial Equipment
Scanner
Test Equipment
Turntable
More Langer categories
Manuals database logo
manualsdatabase
Your AI-powered manual search engine